Success usually comes to those who are too busy to be looking for it.Henry David Thoreau

Where to Put a Thermometer in a Reptile Tank?

Where to Put a Thermometer in a Reptile Tank?

Keeping your pet reptiles happy and healthy requires knowing their temperature preferences. So how do you know where the best spot is for a thermometer?

This guide will answer all of those questions, as well give some helpful tips on choosing which type would work great with what kind or tank setup they have!

Reptile Thermometer Setup Tips

To get an accurate reading of your tank’s temperature, you should place the thermometer in a spot that represents the current condition of your tank.

The thermometer should be placed in a spot where it can see all across the surface area without being influenced too much from one side or another. This will give you the most accurate idea about how warm (or cool) everything really feels inside!

You need more than one thermometer in your tank so you can accurately measure the temperature difference. If your home has multiple levels or large tanks, it is a good idea to get an extra thermometer to help you measure how heat moves through these habitats.

When using a thermometer to monitor the temperature of your pet’s enclosure, make sure it is not contacting any surfaces. This includes the sides and decorations in your tank, as well as the substrate or bottom of the tank. If any of these are touched, it could give an inaccurate reading.

You can use a thermometer to measure the temperature of your pet’s enclosure. Make sure you put it in something like an insulated cup or dish. If you place your phone on this type of reading material, the results will be more accurate than if you just placed it on a bare surface. This also protects your phone from any damage that might be caused by hotspots.

Calibrating your thermometer is imperative for getting accurate readings. The best way to calibrate your thermometer is to put it in boiling water. If it doesn’t change, then you need to adjust the reading on the old thermometer. [1]

Reptile Thermometer Setup Tips

Reptile Thermometer Physical Setup

There are a few key things to remember when setting up your reptile thermometer:

  • First, make sure the sensor is placed in the warmest part of the tank. This is usually near the basking spot or heat lamp.
  • Second, be sure to place the sensor away from any potential sources of heat or cold drafts.
  • Third, pay attention the sensor is not in direct sunlight, as this can skew the readings.
  • Finally, make sure the thermometer is placed at eye level so you can easily read it.

If you follow these guidelines, you will be able to get accurate readings from your reptile thermometer. [1]

Thermostat Probe Placement in a Low Enclosure

The basking spot is usually the warmest part of any given cage. This can be used as a measurement point for your probe and it is best if the temperature is close to what it was when hedgehogs lived there.

If this is not possible, then you can use the temperature from a place where hedgehogs used to live or where it is suspected they may have lived before they were relocated.

To get an accurate reading on the temperature throughout your enclosure, place a probe in different areas. If you have large cages, it might be a good idea to test different locations to see how much the temperature varies.

If you want to be sure that your probe is giving accurate readings, place it in a shady area or away from any heat sources. This will help ensure more accurate information about the temperature where they’re located. [1]

Thermometer Placement

In the wild, it’s important for reptiles to regulate their body temperature by basking in hot sun or seeking shade. Gophers have a few ways they can stay cool. One way is to burrow underground. They can also stay out until it is dark so that you will see them again soon.

It is important to provide your reptile with a varied diet so they can thermoregulate effectively. For example, some species need warmer temperatures than others. This will require more heat lamps or basking spots depending on their needs!

The perfect way to keep your pet healthy and happy is with the right equipment. A thermometer will help you monitor the temperature, making it easy for you to adjust the heat lamps or basking spots as needed.

Thermometer Placement

Why Do We Need a Thermostat Probe?

You need a thermostat probe in your reptile tank for two main reasons.

  1. The first is to make sure the temperature inside the terrarium stays consistent. If the temperature fluctuates too much, it can stress your reptile and make them sick.
  2. The second reason is to help you regulate the amount of heat being emitted from your heating elements. By having a thermostat probe in the tank, you can make sure that your reptile is getting just the right amount of heat.

There are a few different places that you can put your thermometer probe in your reptile tank.

  • The first option is to place it on the floor of the terrarium, near one of the hide spots. This is a good option if you have a small reptile that likes to burrow, like a leopard gecko.
  • The second option is to place the probe on one of the basking rocks. This is a good option for larger reptiles that need to bask in order to regulate their body temperature.
  • The third and final option is to place the probe in the middle of the terrarium. This is a good option for reptiles that like to climb and bask, like bearded dragons. [2]

Where Do We Put a Reptile Thermostat Probe?

There are a few things we need to consider when placing our reptile thermostat probe. Ideally, we want to place the probe in an area of the terrarium that:

  • Is representative of the overall temperature of the enclosure
  • Is not in direct sunlight
  • Is not near any heat sources (e.g., heat lamps, basking spots)
  • Is not in a drafty area

With those considerations in mind, let’s take a look at some of the most common places to put a reptile thermostat probe.

One of the most popular places to put a reptile thermostat probe is on the side of the terrarium, near the substrate. This is a good place to take the temperature because it is typical of the whole enclosure. However, be sure to avoid placing the probe in direct sunlight or near any heat sources.

Finally, some people like to put their reptile thermostat probes in the basking area. This can be a good location if the basking area is representative of the overall temperature of the enclosure. [2]

Where Do We Put a Reptile Thermostat Probe

A Step-by-Step Guide

If you’re new to owning reptiles, you may be wondering where the best place to put your thermometer is in the tank.

Reptiles are ectotherms, meaning they rely on external sources of heat to regulate their body temperature. This is why it is so important to have a well-designed enclosure with the correct lighting, heating, and hiding spots.

One common mistake new reptile owners make is placing the thermometer in the wrong spot in the tank. Remember that reptiles need a temperature gradient in their enclosure, meaning they need warmer and cooler areas.

A good rule of thumb is to place the thermometer in the warmest spot in the tank. This way, you can easily tell if the temperature is too high or low and make adjustments to keep it comfortable.


Where Should I Put the Thermometer in My Reptile Tank?

In order to keep your temperature consistent and ensure the health of both your captive animal, as well its habitat, a thermometer should be placed in each section so that it can monitor changes. There are different types of thermometers.

Some are used to monitor the temperature inside an enclosure while others have more features, like being able to record data over time or alerting the owner when something goes outside of the ideal range. This makes them great tools!

The size of your thermometer is an important factor to consider when buying one. Some thermometers are small and can be hidden easily. Others may need to be placed in an open area or away from any heat sources. Make sure the thermometer is not too close to any sides though-this could give inaccurate data!

Pay attention when you put the thermometer in an easy-to-read place. If there are other things around that could move and make readings difficult, it’s not ideal.

Where Should I Put My Thermometer in My Snake Tank?

There are a few things to consider when placing your thermometer in your snake’s enclosure.

  • First, you want to make sure that the sensor is not in direct contact with any of the surfaces in the tank. This could give you an inaccurate reading.
  • Second, you’ll want to place the thermometer near the basking spot or heat source. This is the most accurate way to measure the temperature in the tank.
  • Finally, you want to make sure that the thermometer is easily visible so that you can check it regularly.

Glass and plastic tanks both have the option of using suction cups or zip ties to attach their thermometers. If you want a more permanent solution, we recommend drilling holes in your glass tank so that it will stay securely fastened.

This will make it easy for any cleaning staff members who may come by during routine maintenance sessions.

Where Should I Put the Thermometer in My Bearded Dragon Tank?

If you want the most accurate reading possible, make sure your thermometer is placed in an area that’s not too hot or cold. Keep it away from heat sources and basking areas so its readings are representative of overall tank temperature!

You should also ensure that the thermometer is placed in an area where your dragon has access to. This way, they can help regulate their own temperature by moving around and taking care of things themselves!

You’ll want to consider placement of your thermometer based on ease-of use. You don’t want to have to reach into the tank every time you need to check the temperature. Placing the tank near an outside edge or close to the top works well for most people.

Put the Thermometer in My Bearded Dragon Tank

How Do You Use a Reptile Thermometer?

A thermometer is a great way to get information about your favorite animal or to find the perfect gift. There are two types of thermometers that are used to measure the temperature of reptiles: digital and analog.

The analog thermometer is more accurate, but the digital thermometer is easier to use. Decide on what type suits best before buying so that it can be used safely!

The most common type of thermometer for keeping track heat levels in a tank is an analog one. The water meter usually has metal probes that you insert into your pets’ water. It also comes with long cords so you can easily hang it near their home or habitat without having to worry about being too far away.

To use an analog reptile thermometer, simply insert the metal probe into the tank and wait for the temperature gauge to reach the correct temperature.

Digital thermometers are more accurate than analog ones, but they can be expensive. Most digital reptile thermostats have small displays that show the current temperature. Some thermostats also have alarms that sound if the temperature gets too high or low, so you don’t miss out on either end!

To use the digital thermometer, simply insert it into your tank and wait for its display to reach room temperature. You can also set an alarm if you want a notification when things get too hot or cold.

Useful Video: Thermometer Guide for Reptiles: The Best Types of Thermometers for Reptiles & How to Use them


So, where do you put a thermometer in a reptile tank? The short answer is that it depends on the type of reptile and the size of the tank.

For smaller tanks or for reptiles that like warmer temperatures, you can place the thermometer near the light source.

For larger tanks or for reptiles that prefer cooler temperatures, you should place the thermometer in a more shaded area. By understanding your reptile’s needs and using a thermometer to monitor their environment, you can help keep them healthy and happy.

Have you ever needed to use a thermometer to check the temperature in your reptile tank? What tips do you have for keeping your pet comfortable?


  1. https://www.reptiles.swelluk.com/help-guides/reptile-thermostat-setup/
  2. https://www.evolutionreptiles.co.uk/blog/vivarium-thermostat-probe-position/